Forklift Training Program Edmonton

Forklift Training Program Edmonton - Forklifts are sometimes referred to as hi los, lift trucks or jitneys. These powered industrial trucks are used widely nowadays. Department stores utilized forklifts to unload merchandise from trailers. Warehouses use them for tiering product. And grocery stores use small models to drop stock in the aisles. Whether transporting lumber at a sawmill or loading material at a construction site, forklift operators must be properly trained and licensed. The priority should be on worker and pedestrian safety. This forklift training program teaches the safety and health rules governing forklifts to be able to guarantee their safe and efficient utilization.

Forklift Training Program Safety Tips:

Forklift training courses are meant to ensure that the operator can control the forklift safely in tilting, traveling and lifting. Only trained operators must drive a forklift.

Safety guidelines while traveling - hands, head, legs, arms and feet should be kept in the forklift truck throughout traveling. The forks must be tilted back and low to the ground. Observe posted traffic signs. Honk the horn and reduce speed when taking a corner. If the driver's vision is blocked by the load, slowly drive backwards. Pre-inspect the ground for potential dangers, like for example objects, wet or oily spots, rough patches, holes, vehicles and people. Avoid stopping immediately.

If pedestrians pass across the vehicle or moves into a blind spot, the forklift must be stopped, the load lowered, waiting until the way is clear. If a load is being transported on an incline, the forks must be pointed uphill with a load and downhill without a load. The forklift must just be turned around when on level ground.

Safety tips when steering - Never turn the steering wheel sharply if traveling fast. Turn using the back wheels and support the load by the front wheels. An overloaded truck would be difficult to steer. Adhere to load limitations. Do not add a counterweight as a way to improve steering.

Safety guidelines while loading - The forklift's recommended load capacities should be followed; the information could be found on the data plate. Always make certain that the load is placed based on the suggested load centre. The forklift will remain stable as long as the load is kept close to the front wheels.

Before inserting the forks into the pallet, the mast of the forklift should be in an upright position. Level the forks prior to inserting them.

Click to Download the pdf